12V 30A Power Supply for LED Strip RV CCTV 3D Printer Car

About this item

• 𝐈𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧𝐬 𝐁𝐞𝐟𝐨𝐫𝐞 𝐔𝐬𝐞: We suggest the max use of power should be no more than 80% of the full loads, otherwise,the power supply's spanlife will be shortened. We recommend you to use this 12V 30A 360W power supply to power devices less than 288W. For resistive device, SMPS peak power ≥ device power × 1.25 times. For Motor device, the peak power of the SMPS needs to be more than 2 times the power of the Motor.
• 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐭 𝐒𝐦𝐚𝐫𝐭 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: The aluminum shell is designed with multiple heat dissipation holes and a built-in temperature-controlled cooling fan. The cooling fan only operates when the internal temperature reaches 113°F (45°C), allowing for more efficient heat dissipation.
• Sure! Please provide the lines that you would like me to modify, and I'll help you rephrase them while maintaining their original meaning.
• 𝐖𝐢𝐝𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧: DC 12V Pump, Winch, Car Jack, Car Stereos, Amplifier, Radios, Air Compressor, LED Light Strip, Brushless Motor, DVR NVR CCTV Security Camera System, Household Appliances, Electronic Devices, Disel Heater, 3D Printer Car Device, Automation Equipment and other 12V devices no more than 360W.(Indoor use only!) 𝐍𝐎𝐓𝐄: NOT for Electrolysis tank
• 𝐌𝐮𝐥𝐭𝐢𝐩𝐥𝐞 𝐒𝐚𝐟𝐞𝐭𝐲 𝐏𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧𝐬: All the power supplies are put through rigorous quality control procedures to ensure safe, reliable operation for years to come. Built in multiple safety protections, such as overload cut-off, over voltage cut-off, over temperature cut-off, short-circuit cut-off.
• 𝐍𝐞𝐰 𝐕𝐞𝐫𝐬𝐢𝐨𝐧 𝐂𝐨𝐧𝐯𝐞𝐫𝐭𝐞𝐫: With red button on/off switch function, more safe and convenient power operation. Input voltage: AC 110V / 220V (85-140V / 185-265V); Output current depends on the device, e.g.DC 12V 5A 60W, 10A 120W, 20A 240W, and the peak current is 30A, peak power 360W.
• 𝐏𝐫𝐚𝐜𝐭𝐢𝐜𝐚𝐥 𝐚𝐧𝐝 𝐂𝐨𝐧𝐯𝐞𝐧𝐢𝐞𝐧𝐭 𝐀𝐜𝐜𝐞𝐬𝐬𝐨𝐫𝐢𝐞𝐬: 12V AC/DC Adapter with car cigarette lighter socket, aligator clips, heavy-duty copper power cord, wire lugs, metal clip and screw. Dial to the correct gear position, cut off the power before disassembling the connection. (Note: 110V for USA/CA and 220V for EUR.)